Bringing the team together
Ben Hammer, a photographer from the cologne artist collective Chips & Champagner teamed up with Boinx Software’s head of marketing, Steffen Skopp, to video stream a concert of a german newcomer band called KLAN. The concert was planned to take place during the Cologne co/pop festival live 2019.
Because mimoLive is an easy and lightweight video streaming solution, Ben and Steffen thought it would be a great idea to give it a try. Ben focused on the management of the event itself, while Steffen took the responsibility to get the equipment and the tech team. They got heavily supported by the Chips & Champagner Crew and several more friends.
The team had to face two main issues. They started to discuss which cameras to use and finally they chose two NDI dome cameras on stage, two handheld cameras left and right of the stage, one camera from the sound podium for the complete observation of the stage and one iPhone to get some impression from inside the audience.
The venue CBE in Cologne is an old railway station which has thick walls made of stones. On the roof the venue, there is a busy railway track which lots of close distance trails for the many commuters working in the city. The team marked the circumstances as a risk for using radio transmitter for the video signals.
The next main headache for Ben and Steffen begun when they received the schedule of the slot for the band. KLAN was scheduled first to play on stage, which set the time for tear down the equipment and clear the stage to 1 h. Because of the short timing for tear down, they wanted to use radio transmitter instead of long SDI for the cameras. But there was this risk of interfering signals from the trains and their magnetic fields.
In the end the decided to use a mix of SDI and NDI™ cameras and utilizing iPhones via a private WiFi network. They even used two TeraDek transmitter the send the SDI signals from the stage to the video mixing Mac. The resulting video met the high standards of the band’s record label, Warner Music Group. Only in some scenes you see video noise caused by the interfering signals of the near train station.
Camera setup for a concert
3x SDI cameras,
2x NDI cameras,
1x iPhones via mimoCall,
In order to stream to two destinations at once and save a recording to disk in FullHD 1080p30, the team decided to use a 10-core iMac Pro which turned out to provide much more power than was actually needed.
Two of the SDI cameras where handheld operated by experienced camera operators. These cameras where hooked up via the TeraDek wireless SDI transmitter, allowing for free movement in front of the stage.
One BlackMagic SDI camera was mounted in the back of the venue to provide a wide angle shot. Two remotely operated Lumens NDI PTZ cameras where positioned on the stage to provide close ups of the musicians and a reverse view of the audience.
The mimoLive setup
Multiple different camera views were stored in the presets and allowed the director a broad choice of images. To capture the emotion of the audience, two team members where using their iPhones in the crowd wirelessly via mimoCall. A separate sound mix was provided for the live stream from a secondary mixing board via stereo XLR into a Zoom H5 digital audio interface. The director used an iPad with a mimoLive Remote Control Surface to operate mimoLive by this fingers.
Challenges and Learnings
It was impossible for team to install cables from the video booth to the stage because of time constraints for set up and tear down. Since NDI® is a network protocol, and since multiple video signals can be send over a single LAN connection, bringing the two NDI cameras on stage online were simple. Fortunately, there was an existing LAN cable connection from the director’s area to the stage.
The team chose to use Teradek Bolt transmitters for the other two SDI stage camera.
Video and Sound Quality
For the outgoing uplink to the internet, the stream bandwidth was limited to 1500 bps by mimoLive to secure a stable streaming connection. The team chose stability over quality. mimoLive allows a very precise limiting of the uplink streams to Facebook and YouTube.
Typically the first audio mixer optimizes the sound quality to the room and for the audience. Because these settings are not great for listing outside the room, the team had a second audio mixer. He optimized the sound quality only for the stream. It is a good idea if you can afford to hire a second audio engineer.
- 2x Lumens VC-A50PN NDI Camera
- Ubiquiti Networks 8-Port UniFi Switch
- 2x Sony PXW-X70 Camera
- TeraDek Bolt Pro500
- TeraDek Bolt Pro300
- Blackmagic Micro Studio Camera
- Apple iPhone 8+
- Zoom H5 Handy Recorder
- Sonnet Echo Express SE1 TB3 PCIe Expansion Box
- Blackmagic Design DeckLink Duo 2 SDI card
- Apple iMac Pro (27-inch with Retina 5K Display, 3.0GHz 10-core Intel Xeon W, 64GB RAM, 1TB SSD, Radeon Pro Vega 64)
- Apple iPad
- mimoLive™ -- Video switcher software for Mac
KLAN – Stefan & Michael Heinrich, Joël Fonsegrive, Carlo Caduff
Live Sound – David Trapp
Broadcast Sound – Beray Habip
Director – Marcus Nitschke
Camera – Henning Frosch, Johnny Brungs
Production – Ben Hammer, Steffen Skopp, Laura Giltjes
Production Assistance – Johanna Keuser, Sonja Hegel
Tech Support – Oliver Breidenbach
Video Documentation and Cut – Tobias Witzgall